GLOBAL · EXPORT
Fire-Rated, PVC-Free Architectural Film
A fire-rated architectural film (interior film / deco sheet) for walls, doors and furniture — KFI-certified quasi-non-combustible and PVC-free. A polyolefin (PP/PET) sheet with a fused metal fire-safety layer, no chlorine-derived toxic gas. We welcome distributor and export inquiries worldwide.
Contact us about export- KFI-certified
- PP/PET (PVC-free)
- Made in Korea
Accent wall · Natural (original)Lower wall — actual install: Hansol AW005Solid 6
Painted wood 3
Wood 11
Tap a colour to skin this room’s accent wall · real product swatches
At a glance
- Material
- Polyolefin PP/PET (PVC-free)
- Thickness
- 0.15 mm (≈6 mil)
- Width
- 1,220 mm (48 in)
- Structure
- 4-layer with metal fire-safety layer
- Fire grade
- Quasi-non-combustible (KFI, KS F ISO 5660-1)
- Origin
- Made in Korea
Certified in Korea, testable to your local fire standard
Certified quasi-non-combustible (준불연) by KFI under KS F ISO 5660-1 (cone calorimeter): total heat release ≤ 8 MJ/m² over 10 minutes, peak heat-release rate not exceeding 200 kW/m² for more than 10 consecutive seconds, plus a gas-toxicity test.
Fire-rated interior finishes are required for public and escape-route areas in Korea, Japan (準不燃, ISO 5660-1), China (GB 8624 B1) and the EU/Germany (EN 13501-1). Testing to your local standard can be arranged on request.
What happens when PVC burns
PVC contains chlorine — on combustion it releases corrosive hydrogen chloride (HCl) gas. In real fires, smoke and toxic gas, not flame, are what threaten people most.
In apartment-building fires in Korea, 77.9% of deaths involved smoke or toxic-gas inhalation (Korea Fire Safety Institute analysis, 2014–2018).
What it is
A decorative interior film (deco sheet / interior film) for walls, columns, doors and furniture. Conventional interior films are usually PVC; ours is made of polyolefin (PP/PET) — the same food-grade material family used for food packaging.
A metal fire-safety layer is fused into a thin 0.15 mm sheet to achieve a quasi-non-combustible grade certified by the Korea Fire Institute (KFI). It contains no PVC and no phthalate (DOP) plasticizers.
Inside the 0.15 mm sheet — 4 layers
- 1Coating layer — surface treatment & embossing
- 2Print layer
- 3Fire-safety layer — fused metal core
- 4Base layer
Why PVC-free matters
PVC-free polyolefin
No chlorine — on combustion it does not release hydrogen chloride (HCl) and is not a dioxin precursor, unlike PVC film.
Metal fire-safety layer
A fused metal layer delays flame spread and enables a quasi-non-combustible grade in a thin 0.15 mm film.
Lower toxicity, healthier spaces
Food-grade PP/PET with no phthalate (DOP) plasticizers, avoiding the associated indoor-air concerns.
Durable surface
Higher surface hardness than PVC film — better resistance to dents and pressure marks.
Design range
Solid, wood and painted-wood finishes with sharp print and a soft-touch surface.
Thin & easy to apply
0.15 mm self-adhesive film applied over approved substrates.
Product lines
SAVE quasi-non-combustible sheet (Neotec) and Lasola Art-Eco quasi-non-combustible material sheet (Hansol): solid, wood and painted-wood series — 55 colours. Stone and fabric finishes are available via Hansol Storyfilm (non-fire-rated).
Finishes & colours
The same finishes and colours offered in Korea — in a fire-rated, PVC-free film.
Solid
Clean, uniform matte colours
Wood
Natural wood-grain textures
Painted wood
Painted-look matte wood
Stone
Marble and stone patterns
Browse the full colour range
Search and filter every colour by finish. Click a swatch to enlarge and inquire.
Solid, wood and painted-wood colours in SAVE (Neotec) & Art-Eco (Hansol). Stone & fabric finishes: see the sample books.
55
Solid
(18)Wood
(32)Painted wood
(5)Sample books & downloads
Browse the digital sample books online, or download the technical spec sheet. Physical samples are available on request.
Hansol Art-Eco (Lasola) 2026
View online
Neotec SAVE 2025
View onlineSample books open on dguard.kr — the official Korean retail channel for our film.
Technical data sheet — installation & handling
Product characteristics
- CPP / polyolefin base with minimal heat-induced shrinkage or expansion. Because the film barely stretches, one-piece application over membrane or complex curved surfaces can be difficult.
- For complex curves (mouldings, corners), plan segmented, overlapping application section by section.
- Avoid severe creasing or folding — the film may not fully recover its original state.
- Quality is maintained for at least 5 years from the manufacturing date, and up to 8 years under recommended storage conditions.
Water-based primer dilution (primer : water)
| Joints & edges | 7 : 3 |
| Flat panels | 5 : 5 |
Apply the diluted primer in 2–3 even coats.
Installation method
- Water-based primer — dilute per the dilution table and apply 2–3 even coats.
- Drying — this film has low breathability (high-density resin); if the primer is not fully dry, residual gas or moisture can reduce adhesion and cause lifting.
- Flat surfaces — let the film settle, then press evenly along the grain with a plastic or steel squeegee, using about twice the pressure of ordinary PVC film.
- Corners / right angles — the film has strong restoring force; apply moderate heat with a hot-air dryer or heat gun (from ≥ 20 cm away), then bend firmly and press.
- Working temperature — below 10 °C initial adhesion drops sharply; use hot air and keep the room at 18–24 °C. Full settling can take from ~15 days up to 6 months depending on site conditions.
- Finishing — after installation, heat-treat and check there are no under-adhered areas.
Installed across Korea
Our fire-rated film is supplied to demanding spaces nationwide — apartment complexes of up to 500 units, hospitals and clinics, dozens of schools, public facilities and luxury retail — exactly where fire-rated interior finishes matter most.
- 500+
- spaces supplied
- 50,000 m²+
- cumulative area installed
Cumulative figures as tracked by D-Guard, the official domestic sales channel.
Reference installations in Korea. Photos: D-Guard project gallery.
Distribution network
Dealer network in Korea
Our nationwide dealer network across Korea — headquarters in Daegu plus regional dealers, shown at city level.
- Headquarters
- Dealer
- Fabricating dealer
- 예일데코 (본사·총판) · Daegu · Headquarters
- 하나인테리어필름 · Namyangju, Gyeonggi · Dealer
- 뉴예일데코 (서울영업소) · Seoul · Dealer
- 한솔 DSS · Sejong · Dealer
- 금진건축자재 · Jinju, Gyeongnam · Dealer
- 아트인테리어필름 · Gumi, Gyeongbuk · Dealer
- 드림아트 · Incheon · Dealer
- 온랩디자인 · Bucheon, Gyeonggi · Dealer
- 미래디자인 · Busan · Dealer
- 한길 · Gwangju · Dealer
- 동성리에코 · Daegu · Fabricating dealer
About YEILDECO
YEILDECO is the authorized distributor of Hansol Lasola Art-Eco quasi-non-combustible interior film and Neotec SAVE quasi-non-combustible sheet. The film is quasi-non-combustible — one grade above flame-retardant — and goes into homes, shops and public buildings where fire-rated interior finishes are required.
Built on eco-friendly polyolefin (PP) material, a metal fire-safety layer, a registered patent and public certifications (KFI, KCL, Korea Eco-Label), we deliver genuine, reliably certified products.
YEILDECO is led by Cheol Son and is based in Daegu, Korea, where the full colour range and the original certificates can be inspected in person. The film we distribute has been installed nationwide — in schools, hospitals and apartment complexes of up to 500 units.
Global fire standards
One fire. Five names. The same physics.
Japan calls it 準不燃. China, B1 (难燃). Germany, B-s1,d0. The US, Class A. Korea calls it 준불연 — and defines it exactly: total heat release under 8 MJ/㎡ over the 10-minute cone-calorimeter test (KS F ISO 5660-1), with the peak heat-release rate never exceeding 200 kW/㎡ for more than 10 consecutive seconds. Our film is KFI-certified to precisely that.
Every building code measures the same three things — rate of heat release, flame spread, and smoke / toxic gas — for one goal: to buy occupants time to escape. Across fires, smoke and toxic-gas inhalation, not flame, is the leading cause of death.
KoreaKFI-certified
- Equivalent grade
- 준불연
- Test method
- KS F ISO 5660-1 (cone)
- Key threshold
- ≤ 8 MJ/㎡ · 10 min · ≤ 200 kW/㎡ (10 s) · gas ≥ 9 min
- Interior mandate
- Building Act Enforcement Decree §61 · Multi-Use Establishments Act §10
Japan≈ identical to Korea
- Equivalent grade
- 準不燃
- Test method
- ISO 5660-1 (JIS A 1321)
- Key threshold
- 8 MJ/㎡ · 200 kW/㎡ · 10 min
- Interior mandate
- Building Standard Act — interior finish restrictions (内装制限)
China
- Equivalent grade
- B1 (难燃)
- Test method
- GB 8624 (SBI)
- Key threshold
- FIGRA ≤ 120 W/s · THR ≤ 7.5 MJ
- Interior mandate
- GB 50222
Germany / EU
- Equivalent grade
- B-s1,d0
- Test method
- EN 13501-1 (SBI)
- Key threshold
- schwer entflammbar
- Interior mandate
- MBO · VStättVO
USA
- Equivalent grade
- Class A
- Test method
- ASTM E84
- Key threshold
- flame-spread index
- Interior mandate
- IBC
Test methods differ by region — Korea and Japan use the cone calorimeter (ISO 5660-1); China and the EU use the SBI method; the US uses ASTM E84. Grades therefore correspond approximately (≈), not exactly — except Korea and Japan, which judge this tier by the identical ISO 5660-1 thresholds. (준불연 uses the stricter 10-minute cone test; flame-retardant / 난연 is judged at 5 minutes.)
For your market
KFI is a national fire authority — not a self-declaration. Our film is certified in Korea, and we are candid about scope: testing to your local standard (EN 13501-1 / GB 8624 / JIS) can be arranged on request.
What we hold — and what we don’t
YEILDECO holds Korean certification. Our film is certified by KFI (Korea Fire Institute) to Korea’s 준불연 (quasi-non-combustible) standard, KS F ISO 5660-1. We do not currently hold EN 13501-1 (EU), GB 8624 (China) or JIS A 1321 (Japan) certificates. Because these standards rest on the same fire-science principles — and Korea and Japan share the identical ISO 5660-1 test — independent testing to your local standard can be arranged on request. As with comparable certified decorative films worldwide, the classification applies to the film installed on its tested substrate (gypsum board, cement board or steel plate).
Certifications
KFI certificate and inspection/test reports, a KCT fire-test report and a KCL environmental (VOC) test report, the Korean Environmental Label, the HB (healthy building material) group standard, and a registered patent.
Fire performance
Environment & indoor air
Innovation
YEILDECO is the authorized export partner for Neotec and Hansol; the certificates are held by the manufacturers. These are Korean (KFI / KCL / KCT) certifications. Testing and classification to your local standard — EN 13501-1, GB 8624 or JIS — can be arranged on request.
Export-ready stock — Daegu, KoreaFor distributors & importers
We welcome distributor and OEM / private-label partnerships. The commercial terms below are quoted per market and volume — when you contact us, let us know your market and target volume and we will prepare a tailored offer.
- Minimum order quantity (MOQ)
- Lead time
- Incoterms & shipping
- Roll size & packaging
- OEM / private-label
- Sample policy
All terms provided on request.
Frequently asked questions
- What is quasi-non-combustible (준불연) interior film?
- An interior film (deco sheet) certified as quasi-non-combustible material — one grade above flame-retardant, with near-non-combustible fire performance that slows fire spread.
- How is it different from flame-retardant?
- Flame-retardant means treated so it is hard to ignite; quasi-non-combustible is a building-finish grade that passes combustion, heat-release and toxic-gas criteria when heated. Quasi-non-combustible has the higher fire performance.
- Where is it required?
- In high-occupancy commercial and public buildings where fire-rated interior finishes are legally required, and increasingly in large apartment complexes and corporate buildings.
- Is the film eco-friendly?
- Yes. It uses food-grade polyolefin (PP), minimizing hazardous components, and holds the Korea Eco-Label and the HB group standard.
- How does it differ from ordinary interior film?
- Ordinary film has no fire-safety standard; ours includes a fire-safety layer and passes accredited tests (KFI, KCL). Design quality matches ordinary film.
Export & distributor inquiries
Contact us about export, distribution or OEM partnership. We respond with terms tailored to your market and volume. Reach us by email — business hours Mon–Fri, 09:00–18:00 KST (GMT+9).
KFI-certified quasi-non-combustible · KS F ISO 5660-1 · PVC-freeYEILDECO · Daegu, Republic of Korea
Nationwide dealer network in Korea — view the live list ↗